What's New

Ford Duratorq Gasket Sets

Engine Australia offer Diesel Power Parts (DPP) Full & VRS gasket sets for the following engines -


Ford Duratorq 2.2L 4cyl TDCI Puma GBVA-J

Found in Ford Ranger, Mazda BT-50 Oct 2011 onwards, and VN transit Feb 2014 onwards


Full gasket set

VRS gasket set


High Performance CrankShaft - Nissan TD42T/Ti

"New high performance Steel crankshaft to suit Nissan TD42T/Ti engines" This steel crank is manufactured in Australia from a 4340 steel Billet. It has been manufactured with 12 counterweights for stronger construction and smoother operation. The Crankshaft is supplied balanced and comes with an Isotropic polish finish, which gives a super smooth surface to reduce friction on the bearings.


Nissan TD42 Aluminium manifold

"New Aluminium manifold for Nissan TD42 engines manufactured by MB Diesel Performance of Australia" This manifold has been manufactured to give better air flow and consistent air flow to each cylinder of the engine. It can be manufactured with the inlet on either side of the manifold to allow for different set ups of intercooler and intake systems.

Performance Oversize inlet and exhaust valves to suit Nissan TD42


This set includes 6 x High Performance 1 mm oversize head exhaust valve to suit Nissan TD42 series. One piece, tip welded, stellite face, nitrided stem. Head diameter 39 mm, length 117 mm, stem diameter 7.96 mm. These valves must be purchased as an engine set. Valve seat insert MUST be replaced, part number VI1614E-1N. (DPP brand - from USA)



NEW - Nissan TD42 Series Head Studs

We are now stocking ARP Cylinder head stud, washer and nut sets to suit the Nissan TD42 series. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. (ARP brand - made in USA)

Just Released

Forged, billet, 4340, H-beam conrods to suit the Nissan TD42T/Ti. These conrods have the tapered small end, 30 mm pin, ARP2000 bolts and are MADE IN AUSTRALIA. These are premium conrods for the discerning engine builder who demands the best. Sold as an engine set of six, all conrods in a set have less than 1 gram variation in weight.